Rail Alignment Fixture (4.7mm)


In stock

SKU: AKT026 Category: Product ID: 5465


The rail alignment fixture is used set the space between the top and lower rail when welding the lower bolt guide rails into a stamped receiver. Insert the rails into the receiver, secure the fixture to the rails with the screws and clamping plates provided. This will provide a parallel 4.7mm (.185″) gap between the top and lower rail. The front of the rails should make contact with the back of the trunnion. Tools Required: C-Clamp and spot welder.


Made in the USA

Additional information

Weight .224 lbs
Dimensions 4.25 × 2.75 × 0.25 in